Home
|
Site Map
|
About
|
Contact
|
News
Pre Owned Craft
Special Offers
Boat Storage
Marina
Volvo Penta Cornwall
Marine Engineering
Mariner Outboards
Shop & Dinghies
Marine Trailers
Fed Up Towing? We Have The Solution
Gulls A Problem? You Need A Gullsweep
Webcams, Weather, Tides & Charts
<< Back to Listing
GS-SRM, Small Rail Mount for up to 1' (2.54cm) diameter tube
Place the G clamp over railing & tighten so it is vertical to the rail. (Option, put tape around rail before mounting to indicate where GS-RM or GS-SRM should be mounted, and also to protect the rail.)
Adjust centre support pin to be vertical to the water & tighten adjustment nut.
Place your Gullsweep® on the support pin, adjust, if not level.
Best for stainless tubes or any other suitable rail
If the clamp is left on a rail, remove centre pin to avoid injury!
Takes seconds to put in place and seconds to remove and store when your boat is running.
Gullsweep® performs best when it is level to the water.
To prevent any risk of the Gullsweep falling off in high winds, we strongly recommend using a Gullsweep retainer kit.
Ordering
GS SRM Rail mount 1 inch 2.54 cm
£26.70
Small Rail Mount for up to 1' (2.54cm) diameter tube. Part number GS-SRM.
Postage
£3.50
Total
£30.20
<< Back to Listing