<< Back to Shop Listing


Volvo Penta Zinc Anode for 120S and MS25S Saildrive with Ambassador Rope Stripper

This is a genuine Volvo Penta anode cut for the Ambassador rope cutter.

Please note this is a Zinc anode for salt water use. A Magnesium version should be used for fresh water. In brackish water an aluminium version should be used. Anodes should not be mixed on any installation.

The anode protects the drive, engine and propeller from corrosion due to electrical currents in the water. When you change your anode, make sure that it is not painted and that it has a good contact via the bolts and metal surface to the drive.

If your anode is worn away by 33% or more, it is advisable to change it, as more of its surface area has been worn away and the remaining anode will wear away much quicker. Please note this is a Zinc anode for salt water use. The magnesium version is only suitable for fresh water and aluminium, which is suitable for brackish water.

Volvo Penta Part No: 876286C (Cut)

For:120S and MS25 S with Ambassador Rope Cutter


Volvo Penta Zinc Ring Anode for 120S and MS25S Saildrive with Ambassador Stripper Rope Cutter Part Number 876286 £49.00
Volvo Penta Zinc Anode for 120S and MS25S Saildrive with Ambassador Rope Stripper
Postage £5.00
Total £54.00


<< Back to Shop Listing